Best answer: How do you calculate cavity volume in SolidWorks?

How do you find the volume of a cavity in SolidWorks?

Measuring Internal Volume

  1. With an open part, click Intersect (Features toolbar) or Insert > Features > Intersect.
  2. In the FeatureManager design tree, select Shell1 and Plane6.
  3. Click Intersect (Features toolbar) or Insert > Features > Intersect.
  4. In the PropertyManager, click Create internal regions and click Intersect.

Can you calculate volume in SolidWorks?

In the FeatureManager design tree, select Intersect[1]. Then in the CommandManager, on the Evaluate tab, click Mass Properties. The Mass Properties dialog box lists the calculated volume for the Intersect[1] body.

How do you fill cavities in SolidWorks?

Filling a Mold Cavity Using Combine

  1. Open the mold assembly in SOLIDWORKS.
  2. Insert Components > New Part. Select a reference plane i.e. Top plane. Exit out of the sketch command.
  3. Insert > Features > Join. Group select all of the parts of the assembly.

How do you find weight and volume in SolidWorks?

Click Mass Properties (Tools toolbar) or Tools > Evaluate > Mass Properties. The calculated mass properties appear in the dialog box. If an assembly contains components with overridden mass properties, those components are listed at the bottom of the Mass Properties dialog box.

How do you find the volume of a bottle?

The formula for the volume of a cylinder is V=Bh or V=πr2h . The radius of the cylinder is 8 cm and the height is 15 cm. Substitute 8 for r and 15 for h in the formula V=πr2h . Simplify.

IT IS IMPORTANT:  Best answer: Where do image capture files go solidworks?

Why is cavity grayed out in SolidWorks?

Cavity can’t do anything (and will be greyed out) if you have only a single (or no) solid body.

How do you intersect in SolidWorks?

To intersect or merge bodies:

  1. With the part open, click Insert > Features > Intersect .
  2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
  3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
  4. Click Intersect. …
  5. Select regions to exclude. …
  6. Select options as required: …
  7. Click .

How do I make a solid surface in SolidWorks?

To convert a boundary surface into a solid, click Insert > Surface > Boundary Surface, and in Options and Preview, click Create solid. To convert a trim-surface feature into a solid, click Insert > Surface > Trim Surface and in Surface Split Options, click Create solid.

Designer blog