How do I change the scale of a sheet in Solidworks?

How do you scale a drawing in Solidworks?

To scale a sketch:

  1. In an active sketch, click Modify Sketch. (Sketch toolbar) or Tools > Sketch Tools > Modify.
  2. In the dialog box, under Scale About, select one of the following: Option. Description. Sketch origin. …
  3. Type a value for Factor, and press Enter. You cannot scale a sketch that has external references.
  4. Click Close.

What scale can you use when you create a drawing view?

A sheet scale is a standard scale value for drawing views placed on the working sheet. Typically, the sheet scale is indicated in the drawing border title block.

How do I change the drawing size in Solidworks?

Setting Scales

  1. To set the scale of an existing drawing sheet, do one of the following: In the status bar click Sheet Scale and click a scale. …
  2. To set the scale of a drawing view, do one of the following: For existing drawing views, select a view or views, then set the Scale in the PropertyManager.

How do I use a drawing template in Solidworks?

To create a template:

  1. Click New (Standard toolbar) or File > New.
  2. Double-click the type of template that you want to create: Part, Assembly, or Drawing.
  3. Click Options. …
  4. On the Document Properties tab, select options to customize your new document template, then click OK. …
  5. Click File > Save As.
IT IS IMPORTANT:  Your question: How do you cut a body with a surface Catia?

Can you scale down a sketch in Solidworks?

(Sketch toolbar) or Tools > Sketch Tools > Scale. In the PropertyManager, under Entities to Scale, select sketch entities for Sketch item or annotations. , and then click in the graphics area to set the point to Scale about.

How do you scale a DXF in Solidworks?

To specify the sheet scale, select Enable scale and choose a scale or User Defined. For User Defined, type a scale in the format 1:1 or 1/1. Scale output 1:1 in Task Scheduler differs from Scale output 1:1 in SOLIDWORKS. SOLIDWORKS lists only scales found in the current sheets.

How do you show scale drawings?

Select the border of the scale area for editing.

  1. Click View tab Viewports panel Scale Monitor. Find. The Scale Monitor dialog box is displayed.
  2. In the drawing area, move the cursor over the scale area (or a viewport ) and check the Scale Monitor dialog box.
  3. Press ENTER to exit this command.

What are the standard drawing scales?

Referred to as 1:10, 1:20, 1:30,1:40, 1:50 or 1:60 scale. Typically in civil engineering applications, 1:10 (1″=10′) is used exclusively for detail drawings. 1:20 and 1:40 scales are used for working plans.

What is a scale of 1 100?

Ratio scales

If the scale of the plan is 1 : 100, this means the real measurements are 100 times longer than they are on the plan. So 1 cm on the plan represents a real length of 100 cm (1 metre)

Designer blog