You can access it by clicking the down arrow of the View Orientation command and then selecting it from the menu. You can also use the shortcut keys Ctrl+SpaceBar to access the command. When you select the option, a cube will show up in the graphics area surrounding your part.
How do you define a view in SolidWorks?
To add a custom named view to the Orientation dialog box:
- Use the Rotate, Zoom, and Pan commands to create the desired view. …
- Press the spacebar to open the Orientation dialog box.
- In the dialog box, click New View .
- Type a name in the dialog box and click OK.
Where is view on solid works?
(View toolbar) or View > Display > Section View. Define a section view by selecting one, two, or three planes or planar faces. Define a section view by selecting one or more zones.
How do you make a 3 view drawing in Solidworks?
To create the Standard 3 View by the standard method:
- In a drawing, click Standard 3 View. (Drawing toolbar), or click Insert > Drawing View > Standard 3 View. …
- Select the model in one of these ways: Select a model from Open documents in the Standard 3 View PropertyManager or browse to a model file and click .
How do you add views in Solidworks?
To create named views:
- Use the Zoom and Pan tools to create the desired orientation for a drawing view or drawing sheet. For example, zoom in to a drawing view or to a title block.
- Click New View in the Orientation dialog box.
- Type a View name and click OK.
How do I get real view graphics in Solidworks?
Click one of the following:
- View Settings > RealView Graphics.
- RealView Graphics (View toolbar)
- View > Display > RealView Graphics.
Which is not a standard 3D view in Solidworks?
Question: Which choice is NOT a standard 3D view in SOLIDWORKS? isometric dimetric oblique trimetric.
What are the three views on solid works?
The Standard 3 View option under Insert > Drawing View creates three related default orthographic (front, right, left, top, bottom, and back) views of a part or assembly displayed at the same time. The view orientations used are based on the orientations (Front, Right, and Top) in the part or assembly.
How do I create an isometric view in Solidworks?
SOLIDWORKS offers an option that allows the user to show an existing section view as an isometric section view. A right-mouse click on an existing section view will display the Isometric Section View option. When Isometric Section View is selected, the section view will change to an isometric view.