How do you view mates in Solidworks?

How do you show mates in SolidWorks?

To view mates:

  1. Select components based on the mates you want to view: Mates to view. Component selection. …
  2. Click View Mates . The View Mates window appears. …
  3. In the View Mates window, select one or more mates. Callouts appear for the selected mates.

How do I turn on quick mates in SolidWorks?

To activate the Quick Mates functionality, click Tools > Customize. On the Toolbars tab, under Context toolbar settings, select Show quick mates. The Quick Mates context toolbar appears when you Ctrl + select mate entities. For model geometry (such as faces, edges, and vertices), you select in the graphics area.

How do you fix mates in SolidWorks?

To fix or float an assembly component:

  1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
  2. Select Fix or Float.
  3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

How do you use mate references in SolidWorks?

To define a mate reference:

  1. In a part or an assembly, click Mate Reference (Reference Geometry toolbar) or Insert > Reference Geometry > Mate Reference. …
  2. Under Reference Name, enter a name for the mate reference.
  3. Under Primary Reference Entity: …
  4. Repeat Step 3 to add secondary and tertiary entities.
  5. Click .
IT IS IMPORTANT:  Is Ansys easy to learn?

How many types of mates are there in Solidworks?

Standard mates include angle, coincident, concentric, distance, lock, parallel, perpendicular, and tangent mates. Advanced mates include limit, linear/linear coupler, path, symmetry, and width mates. Mechanical mates include cam-follower, gear, hinge, rack and pinion, screw, and universal joint mates.

Which mate allows the most degrees of freedom?

In Onshape there is just one Mate between any two parts, and therefore the movement (degrees of freedom) between those two parts embedded within the Mate.



Mates in Onshape & their Types [2020]

Degrees of Freedom Mate Types
Three Degrees of Freedom Planar Mate Ball Mate
Four Degree of Freedom Parallel Mate

What does mating do in Solidworks?

Mates create geometric relationships between assembly components. As you add mates, you define the allowable directions of linear or rotational motion of the components. You can move a component within its degrees of freedom, visualizing the assembly’s behavior.

How do you limit a mate in Solidworks?

To add a limit mate:

  1. Click Mate (Assembly toolbar) or Insert > Mate.
  2. Under Mate Selections, select the entities to mate for Entities to Mate .
  3. In the PropertyManager, under Advanced Mates: Click Distance or Angle . …
  4. A LimitDistance or LimitAngle mate is added to the assembly.

How do I change the position of a part in Solidworks?

To edit a position:

  1. In the FeatureManager design tree, select Mate Controller and click Edit Feature .
  2. In the PropertyManager, under Mates Positions, select Position 2 from the list. The components move to Position 2.
  3. Change the value of Distance1 from 30 to 60 . …
  4. Click Update Position . …
  5. Click .
IT IS IMPORTANT:  How do I get rid of dotted lines in Sketchup?

How do I move a whole assembly in Solidworks?

Click Move Component (Assembly toolbar) or Tools > Component > Move. The Move Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.

How do you add reference geometry in Solidworks?

Left click insert → Reference Geometry to insert planes, axis, coordinate system, mate references, and points. Reference Geometry can also be found on the features toolbar. Left click on the pull down arrow and then left click on the desired tool.

What is exploded view in assembly toolbar?

An exploded view shows an assembly’s components spread out, but positioned to show how the components fit together when assembled. You create exploded views by selecting and dragging parts in the graphics area to create an explode step. … Attach a new component to the existing explode steps of another component.

Designer blog