What is hole note?
About Hole Notes. The hole notes are inserted in hole tables as offset notes by default using the axis of the selected hole as a reference. You can control the placement of these notes when you create hole tables. Hole notes created as offset notes retain their format and position even when you update a hole table.
How do you annotate a threaded hole?
To Add Hole or Thread Notes to a Drawing View
- On the ribbon, click Annotate tab Feature Notes panel Hole and Thread .
- In the graphics window, click an edge or a circular edge to specify the hole. …
- Move the cursor and click to place the note.
- When you are finished placing hole or thread notes, right-click and select Done.
What does blind hole mean?
A blind hole refers to a hole that is reamed, drilled, or milled to a specified depth without breaking through to the other side of the workpiece.
What is a quarter rest?
: a musical rest corresponding in time value to a quarter note.
How do you call a countersunk hole?
Write the dimensions of the countersink, giving first the diameter of the drill hole, then the angle of the countersink, followed by the diameter symbol and the diameter of the larger hole. This dimension can be given either with a diameter symbol first, or with the word DRILL after the first diameter.
How do you show a tapped hole in Autocad?
From the ribbon, Content tab , Holes panel, select Tapped Blind Hole. Select UNC (Regular Thread – Inch), but this time, select the Front view first. Follow the prompts to indicate the starting point, the direction, and the size of the hole. Then drag the size or type a distance, in this case, 1 unit.
When creating hole features the depth specified in the drawing is defined as?
In hole wizard, the hole depth is defined as the distance from the surface to the cylindrical edge (5 mm in the example) below. If you measure from the tapered point, the depth is slightly more at 5.75 mm.