How do you cut a plane in Revit?

How do you cut a reference plane in Revit?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the beam to be cut. Select the reference plane. If you move the wall or the beam, the cut will persist at the wall unless the beam is no longer joined with the wall.

Where is the cut plane in Revit?

The cut plane is located between the top and bottom planes, and it is the dividing line that determines how elements are displayed in the view. The additional plane beyond the primary range is the View Depth.

How do you cut a structural element in Revit?

Cut a Structural Element with the Geometry of an Intersecting Structural Element

  1. Click Steel tab Parametric Cuts panel (Cut By).
  2. Select the intersecting steel elements.
  3. Press . The cut is created at the intersection. …
  4. Select the connection box to access the instance and type properties of the sub-connection.

How do you cut a view in Revit?

Create a Section View

  1. Open a plan, section, elevation, or detail view.
  2. Click View tab Create panel (Section).
  3. (Optional) In the Type Selector, select a view type from the list, or click Edit Type to modify an existing view type or create a new view type.

How do I change the view range?

Modify the View Range

  1. Open a plan view.
  2. On the Properties palette, locate the View Range parameter, and click Edit. Alternatively, enter VR on the keyboard.
  3. In the View Range dialog, modify view range properties as necessary. …
  4. Click Apply to view changes.

What is far clipping in Revit?

The Far Clip feature defines the depth of a view. Use it to exclude from the view any model elements that occur beyond a certain plane. 2D views: You can cut an elevation, section, or callout view at the far clip plane.

How do I create a region plan in Revit?

Create a Plan Region

  1. Open a plan view.
  2. Click View tab Create panel Plan Views drop-down (Plan Region).
  3. Sketch a closed loop using lines, rectangles, or polygons.
  4. On the Properties palette, for View Range, click Edit.
  5. In the View Range dialog, specify the primary range and view depth.

How do you trim a column in Revit?

Use the ribbon tool Modify > Geometry > Cut to cut the Column with the Reference Plane.

How do you cut a wood beam in Revit?

Solution:

  1. Open a section view containing the timber beams.
  2. From the Architecture tab Work Plane panel (Reference Plane)
  3. On the Draw panel, click (Pick Lines).
  4. Pick the timber beam line and extend it to cut the other one.
  5. From the Modify tab, Geometry section, click Cut.
  6. Select the beam to cut and the extended line.

How do you cut a beam angle in Revit?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the beam to be cut. Select the reference plane. If you move the wall or the beam, the cut will persist at the wall unless the beam is no longer joined with the wall.

IT IS INTERESTING:  Best answer: How do you make an existing wall GREY in Revit?
Special Project