Quick Answer: How do I flatten a bent part in Solidworks?

How do I flatten a bend in SolidWorks?

Flattening Sheet Metal Bends

  1. To flatten the entire part, if the Flat-Pattern1 feature is present, unsuppress Flat-Pattern1, or click Flatten. …
  2. To flatten the entire part, if the Process-Bends1 feature is present, suppress Process-Bends1, or click Flatten. …
  3. To flatten one or more individual bends, add an Unfold.

How do you unbend a part in SolidWorks?

Unfolding Bends

  1. In a sheet metal part, click Unfold. on the Sheet Metal toolbar, or click Insert > Sheet Metal > Unfold.
  2. In the graphics area, select a face that does not move as a result of the feature for Fixed face. . …
  3. Select one or more bends as the Bends to unfold. …
  4. Click .

Why is surface flatten greyed out?

The reason for the “Flatten” icon being greyed out was because the sheet metal part had a “Flat Pattern” annotation view and this annotation view was active. By selecting another annotation view, the “Flatten” icon then becomes available again.

How do you flatten sheet metal in Solidworks?

Flattening Sheet Metal Bodies

  1. In the FeatureManager design tree, select the part and click Flatten. (Sheet Metal toolbar).
  2. In the cut list, right-click the body and click Flatten. .
  3. In either the FeatureManager design tree or the cut list, right-click the Flat-Pattern. feature for the part and click Unsuppress. .

How do I use the edge flange in Solidworks?

Adding Edge Flanges

  1. In an open sheet metal part, click Edge Flange. (Sheet Metal toolbar) or Insert > Sheet Metal > Edge Flange.
  2. In the graphics area, select one or more edges for Edge . There are specific requirements for adding edge flanges to curved edges. …
  3. Set options in the Edge-Flange PropertyManager and click .

How do you show a curved line in Solidworks?

To show bend lines in flat patterns, do one of the following:

  1. Click View > Hide/Show > Sketches.
  2. In the FeatureManager design tree, expand Flat-Pattern and Flat-Pattern( n ) . Right-click Bend-Lines and click Show .

How do you size bent sheet metal?

For bends, the minimum distance between the inside edge of the bend and the outside of the hem should be 5 times material thickness plus bend radius plus hem radius.

How do you make a flat plate in Solidworks?

To create a flat pattern configuration:

  1. In a sheet metal part, create a new configuration.
  2. In the FeatureManager design tree, do one of the following: Right-click Flat-Pattern and select Unsuppress . Select Process-Bends and all of the features after it.

How do you flatten rolled sheet metal?

Hammer and flame: flattening sheet metal with extensive expertise and time. Hammer and flame – The art of leveling parts or sheets with this method still exists in the metal fabrication industry. This method uses a hammer to flatten the sheet metal part.

What is a lofted bend?

Lofted bends in sheet metal parts use two open-profile sketches that are connected by a loft. The Base-Flange feature is not used with the Lofted Bend feature. Begin with two open profile sketches. Use Lofted Bends to create a solid feature.

IT IS INTERESTING:  How do I use Layer state manager in AutoCAD?
Special Project