Quick Answer: How do you make a revolved base in SolidWorks?

How do you create a Revolve base in SolidWorks?

Creating Revolve Features

  1. Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
  2. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
  3. Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.

How do you do a revolved cut in SolidWorks?

Creating Extruded or Revolved Cuts as Assembly Features

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Extrude or Revolve PropertyManager.

What does revolved boss base do in SolidWorks?

Revolved Boss or Base is a SolidWorks feature tool which is used to create solid 3D model around an axis. You can revolve the sketch around an axis to add materials to it.

Why can’t I revolve SolidWorks?

Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.

IT IS INTERESTING:  What is sketch ink in SolidWorks?

How do you make a lofted base in SolidWorks?

To create lofts:

  1. Do one of the following: Click Lofted Boss/Base (Features toolbar) or Insert > Boss/Base > Loft. Click Lofted Cut (Features toolbar) or Cut > Loft > Insert. Click Lofted Surface (Surfaces toolbar) or Insert > Surface > Loft.
  2. Set the options in the PropertyManager.
  3. Click .

What is loft in SolidWorks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

How do you make a plane in SolidWorks?

Adding planes to SOLIDWORKS is achieved using the Plane Wizard. The Plane Wizard can be accessed via Features > Reference Geometry > Plane on the command manager, or via Insert > Reference Geometry > Plane from the drop down menu. Up to three references can be selected in order to define a new plane.

How do you make a cone in SolidWorks?

To create a cone:

  1. Click Solids > Draw > Cone (or type Cone).
  2. Set an option for the cone’s base: Center point base: Click in the graphics area to specify a center point or type the 3D coordinates. …
  3. Set the cone height: Click in the graphics area or type a value. – or –

How can you tell if you are sketching on a different sketch plane?

How can you tell if you are sketching on a different sketch plane? The coordinate triad has changed its position to represent the position of the plane you are sketching on.

How do I convert entities in SolidWorks?

To convert an entity:

  1. In an open sketch, click a model edge, loop, face, curve, external sketch contour, set of edges, or set of curves. You can also click an entity after clicking the Convert Entities. …
  2. Click Convert Entities. …
  3. In the PropertyManager, click Select chain to convert all contiguous sketch entities. …
  4. Click .
IT IS INTERESTING:  Best answer: How do I import survey data into Civil 3D?

How do you make a revolve?

To view the revolve, open a 3D view.



Use the Draw tools to sketch a shape to revolve around the axis:

  1. Click Modify | Create Revolve tab Draw panel (Boundary Line).
  2. To create a single revolve, sketch a closed loop.
  3. To create more than one revolve, sketch multiple, non-intersecting, closed loops.

Can you revolve a 3D sketch in Solidworks?

The sketch for a thin or surface revolved feature can contain multiple open or closed intersecting profiles. The profile sketch must be a 2D sketch; 3D sketches are not supported for profiles. The Axis of Revolution can be a 3D sketch.

What does zero thickness mean in Solidworks?

Zero-thickness geometry (also known as non-manifold geometry) exists when edges or vertices in a solid model do not properly connect with adjacent geometry. Every edge of a solid body must have exactly two adjacent faces.

Special Project