Where are reference planes in Revit?
On the ribbon, click (Reference Plane). To draw a line: On the Draw panel, click (Line). In the drawing area, draw the reference planes by dragging the cursor.
How do you change a reference line in Revit?
Add a Reference Line
- In the Family Editor, click Create tab Datum panel (Reference Line).
- Using the drawing tools, sketch the line. The line displays as a solitary solid line until selected or when highlighted during preselection. …
- To use reference lines and linear dimensions to control model geometry:
How do you select planes in Revit?
Select a work plane by name, by picking a plane, or by picking a line in the plane you want to select. On the ribbon, click (Set). In the Work Plane dialog, under Specify a new Work Plane, select one of the following options: Name—Choose an available work plane from the list, and click OK.
How do you rotate a reference plane in Revit?
Controlling rotation in Revit
- Choose Create > Datum > Reference Line > Draw > Line.
- Click the intersection of two reference planes to place the first endpoint, and then click the drawing again to place the other endpoint.
How do you offset reference planes in Revit?
- On the Draw panel, click (Pick Lines).
- On the Options bar, specify an offset, if desired.
- Select the Lock option to lock the reference plane to the line.
- Move the cursor near the line to which you want to place the reference plane and click.
What is a Revit reference plane?
Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model. Topics in this section. Add a Reference Plane. Use the Line tool or the Pick Line tool to draw a reference plane.
What is reference line?
Reference Lines allow you to place lines on the plot at specific locations to mark important values. You could use these to mark control limits or to indicate a trend line for a set of data.
How do you delete a reference plane in Revit family?
Drag the dimension away from the ref plane and place it on the other side of your boundary lines to remove it (you can’t hit delete. Too easy). Now there are no dimensions to the ref plane from the sketch. And there you have it, the geometry is no longer associated with the ref plane.
How do you reference lines in Revit?
Use the Line tool or the Pick Line tool to draw a reference plane.
- On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) …
- To draw a line: On the Draw panel, click (Line). …
- To pick an existing line: On the Draw panel, click (Pick Lines).
How do you reset a work plane in Revit?
Change the Work Plane of an Element
- Select a work plane-based element in a view.
- Click Modify |
tab Work Plane panel (Edit Work Plane). …
- In the Work Plane dialog, select another work plane. …
- If needed, reposition the element on the work plane.
How do I delete a work plane in Revit?
Use the Delete item to delete the active Workplane. To delete the active Workplane click Workplane tab > Active panel > Delete.
How do you create a work plane in Revit family?
In the Family Editor, click Create tab Properties panel (Family Category and Parameters). In the Family Category and Parameters dialog, under Family Parameters, select Work Plane-Based. Click OK. Note: You can make a family both work plane-based and always vertical.
How do I add a rotation parameter in Revit family?
Go to the Modify tab, then the Properties panel, and select the Family Types button. Next to the Rotation Angle parameter, type in a new value and pick the Apply button. Verify that the Reference Line rotates as desired. Pick the OK button when you are satisfied that it rotates as desired.
How do you create an angle parameter in Revit?
Anytime you want to use an angle parameter inside Revit, you need to create a reference line. Create it along the reference plane on the right, with the first point at the intersection of the reference planes. Then, use the Align tool (shortcut: AL) to align the end point of the reference line to both reference planes.