What is a section view in Solidworks?

What is an section view?

What is a section view? A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views.

Where is section view solidworks?

(View toolbar) or View > Display > Section View.

What is a section view in a set of drawings?

A section view is a view used on a drawing to show an area or hidden part of an object by cutting away or removing some of that object. The cut line is called a “cutting plane”, and can be done in several ways.

What are the 7 types of section views?

There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.

When and why is a section view necessary?

In which case, the direction of sight is towards one half of the object. The other half is then mentally discarded. Drafters use sectional views to improve the clarity of complex objects when internal surfaces result in too many hidden lines. Special conventions are used to make a sectional view easy to understand.

IT IS INTERESTING:  You asked: How do you draw a basic shape in SolidWorks?

How do I create a section view?

To create a section view manually:

  1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
  2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
  3. Sketch a section line. …
  4. Click to place the view.

How do I get out of section view in Solidworks?

Removed Section Views

  1. In a drawing, select a view.
  2. Click Removed Section (View Layout CommandManager tab or Drawing toolbar).
  3. In the PropertyManager, for Edge and Opposed Edge, select two edges from the same drawing view. …
  4. Select a cutting line placement method: …
  5. Move the pointer and click to place the view.

How do you section an assembly in Solidworks?

To create a section view:

  1. In a part or assembly document, click Section View. (View toolbar) or View > Display > Section View.
  2. In the Section View PropertyManager, under Section 1, set the properties.
  3. To section the model with additional planes or faces, select Section 2 and Section 3 and set the properties. …
  4. Click .

What is section plan?

Section drawings are a specific type of drawing architects use to illustrate a building or portion of a building. A section is drawn from a vertical plane slicing through a building. This is as if you cut through a space vertically and stood directly in front looking straight at it.

What is the purpose of a section line?

Section Lines: Used to indicate where the cutting plane cuts the material. Section lines are thin and the symbols (type of lines) are chosen according to the material of the object. Section lines are generally drawn at a 45° angle.

IT IS INTERESTING:  Best answer: Can you use Onshape without a mouse?

When should a full section be used?

Full sections



This type of section is used for both detail and assembly drawings. When the cutting plane divides the object into two identical parts, it is not necessary to indicate its location.

How many types of sections are there?

There are 6 type of section formations in Army.

What are the different types of sections?

Examples of different Section Types and how to use them

  • Headline.
  • Row section.
  • Columns section.
  • Buttons section.
  • Text + Buttons section.
  • Grid section.
  • Side-by-Side section.
  • Tabs section.

What is full section?

Full Sections



When a cutting plane line passes entirely through an object, the resulting section is called a full section Fig. 7 illustrates a full section. It is possible to section an object whenever a closer look intentionally is desired.

Special Project