You asked: How do I change Units in AutoCAD Architecture?

How do I change to architectural units in AutoCAD?

Solution: To change units in a drawing: Type in UNITS on the command line. Select Architectural under the first drop-down menu and then click OK.

How do I change the units of an existing drawing in AutoCAD?


  1. create a new drawing.
  2. Enter the command UNITS.
  3. Select the units you need.
  4. Enter the code INSERT or CLASSICINSERT (AutoCAD 2020)
  5. In “Examine” look for your previous drawing and set, by cancelling the corresponding options, that the drawing is inserted without scale or rotation in 0.0.

How do I change the architectural units to decimal in AutoCAD?


  1. Click the Application icon in the upper left.
  2. Select Drawing Utilities > Drawing Setup.
  3. Under the Units tab, in the Length section, adjust the Type dropdown.

How do I change Units in feet and inches in AutoCAD?

How Do I Draw in Feet and Inches in AutoCAD?

  1. Click the AutoCAD Icon in the top-left corner of the AutoCAD interface. …
  2. Click the Drawing Utilities section.
  3. Click Units.
  4. Click the drop-down menu below Type and select Architectural.
  5. Click OK to confirm the change.
IT IS INTERESTING:  How do I edit a split in SolidWorks?

How do I change units in AutoCAD without scaling?

Enter the INSERT command (or CLASSICINSERT in AutoCAD 2020 and newer). Click the Browse button and select the inch-based drawing. Deselect all options so the drawing will go in at 0,0, no scaling, and no rotation.

How do I change the units in AutoCAD 2020?

To Specify the Drawing Units

  1. Click Utilities Drawing Setup.
  2. Click the Units tab. …
  3. Under Drawing Units, select the desired units. …
  4. To scale objects that you insert into the current drawing from drawings with different drawing units, select Scale Objects Inserted from Other Drawings.

How do you change from mm to meters in AutoCAD?

Click Format menu > Drawing Setup. In the Drawing Setup dialog box, click the Units tab. Change the Drawing Units from Millimeter to Meter and click OK.

How do I change dimension units in AutoCAD 2010?

Click Utilities Drawing Setup. Click the Units tab. Under Drawing Units, select the desired units.

How do you convert architectural measurements?

To convert a scaled measurement up to the actual measurement, simply multiply the smaller measurement by the scale factor. For example, if the scale factor is 1:8 and the smaller length is 4, multiply 4 × 8 = 32 to convert it to the larger actual size.

Special Project