How do you use smart dimension in SOLIDWORKS?
To add a dimension to a sketch or drawing:
- Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart. …
- Select the items to dimension, as shown in the table below. You can undo previous selections by pressing Esc. …
- Click to place the dimension. To dimension the…
How do you define a dimension in SOLIDWORKS?
To fully define a sketch:
- Edit a sketch.
- Click Fully Define Sketch. (Dimensions/Relations toolbar) or Tools > Dimensions > Fully Define Sketch.
- Set the options for relations and dimensions in the Fully Define Sketch PropertyManager.
- Click .
How do I edit a smart dimension in SOLIDWORKS?
To change a dimension:
- Double-click a dimension. The Modify dialog box appears.
- Change the dimension value with the arrows, thumbwheel, mouse wheel, or by typing in the dimension box. …
- Choose from: …
- Use the buttons as follows:
How do I turn off smart dimension in SOLIDWORKS?
To disable the rapid dimension selector, in the Dimension PropertyManager, under Dimension Assist Tools, clear Rapid dimensioning. This setting persists across sessions. When the rapid dimension selector is enabled, you can dismiss it by pressing ESC. Pressing ESC again dismisses the Smart Dimension tool.
How do you write dimensions in Solidworks?
Start drawing a sketch; Use click-move-click approach to draw the sketch entity. Enter the required dimension in the highlighted box, then press Enter. If more dimension is needed (such as drawing a rectangle) enter dimension and press Enter until the sketch is done.
What is Instant 2D solidworks?
Instant 2D (introduced in SOLIDWORKS 2016)
The Instant 2D is a sketch feature that allows you to quickly modify your dimensions in a more organic way, than the standard “Modify box.
What is a dimension Convention?
Dimensioning is the convention used for adding measurement notes, such as the length and breadth of the object, to a drawing. Dimensions include text, lines, extension lines and arrowheads.
What does the (-) mean in Solidworks?
ago. Additional comment actions. The (-) means its not fully constrained/defined.
How do you add a dimension to a Solidworks 3D object?
Double-click one 3D sketch plane to make it active. Right-click on the edge of the 3D sketch plane to which you want to dimension, and select Smart Dimension. With the second plane selected, click inside the active plane to add the dimension.
How do I delete smart dimensions?
To remove a dimension from a drawing: Select a dimension and press Delete. Be careful not to delete any dimension that has a reference, such as one used in a note.
How do you change inches to mm in Solidworks?
Changing units in the SOLIDWORKS user interface could not be simpler. Go to Tools>Options>Document Properties>Units to change the units that are being used within the SOLIDWORKS design environment.
How do I remove DimXpert dimensions?
You can use the Delete All Tolerances tool to delete the entire DimXpert database. To delete all DimXpert tolerances: Open a part with DimXpert tolerances. Click Delete All Tolerances (MBD Dimension toolbar) or Tools > MBD Dimension > Delete All Tolerances.
Can I hide dimensions in Solidworks?
You can show or hide 2D and 3D sketch dimensions with the View Sketch Dimensions functionality. Previously, only 3D sketch dimensions were hidden when you turned off View Sketch Dimensions. Click View > View Sketch Dimensions or click View Sketch Dimensions in Hide/Show Items (Heads Up View toolbar).
How do I make dimensions visible in Solidworks?
To re-display the dimensions, right-click the feature or one of its faces, and select Show All Dimensions. To show dimension names, click View > Hide/Show > Dimension Names or Hide/Show Items > View Dimension Names (Heads-up View toolbar).
Why can’t I see dimensions in Solidworks?
If dimensions for a certain feature do not appear, you can right-click on the feature from either the graphics area or the FeatureManager Tree and select Show All Dimensions.