Your question: How do you extrude a curved surface in Solidworks?

How do you extrude a circle in Solidworks?

To create an assembly feature cut:

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.

How do you curve a project in Solidworks?

To project a curve: Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.

How do you extrude a shape in Solidworks?

Extruding Surfaces from a 2D or 3D Face

  1. Click Insert > Surface > Extrude.
  2. Select a face: …
  3. Select other faces to define the extrude as required. …
  4. Select the end condition.
  5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

How do you extrude a hole in Solidworks?

Go to features toolbar and select the extrude cut button as shown below. You can see the yellow color preview of circular hole from the selected surface. Select the “blind” as extrude type. Then you can drag by clicking on the direction arrow in the sketch.

IT IS INTERESTING:  How do you draw a gradient in CAD?

What is extruded boss in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

How do you extrude a projected curve in Creo?

select the surface/ surfaces you want to extrude on, click offset,select first box drop down to the transparent box with light blue box coming out of it (3rd option), click options and under expand area select ‘sketched region’, define it using the define button that pops out, this is like the sketch for your projected …

Can you have a curved plane in SolidWorks?

Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree. Under Direction of Projection , select a plane, edge, sketch, or face as the direction of the projected curve.

How do you extrude a cut surface?

The Extruded Cut feature can be found on the features tab in the Command Manager interface as shown in Figure 1. You can also go to the toolbar and click Insert -> Cut -> Extrude to pull up the Cut-Extrude Feature menu as well.

How do you cut a lofted surface in SolidWorks?

Click Lofted Boss/Base (Features toolbar) or Insert > Boss/Base > Loft. Click Lofted Cut (Features toolbar) or Cut > Loft > Insert.

Special Project