Your question: What is swept Base Command in Solidworks?

What is swept command in Solidworks?

A frequently asked question amongst clients is, “What is a sweep?” Within SOLIDWORKS, a sweep is a tool that creates a solid, a cut or a surface feature by moving a profile along a path. To create a solid, use the Swept Boss tool to move a profile along a path. The profile can contain one or more closed contours.

What is swept boss base in Solidworks?

What is Swept Boss or Base? Solidworks Swept boss is one of the useful features which help to sweeps a closed profile through an open or closed path.

How do you swept cut in Solidworks?

Swept Cut PropertyManager

  1. Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path. For a solid profile, open a part that has a tool body as the profile and a sketch path to follow.
  2. Click Swept Cut (Features toolbar).

How do you do a sweep?

Create a Sweep

  1. In the Family Editor, on the Create tab Forms panel, do one of the following. …
  2. Specify the sweep path: …
  3. On the Mode panel, click (Finish Edit Mode).
  4. Load or sketch a profile. …
  5. On the Properties palette, specify the sweep properties. …
  6. On the Mode panel, click (Finish Edit Mode).
IT IS INTERESTING:  How do I export from STL to CATIA?

How do you sweep the boss base?

Set the PropertyManager options based on the sweep boss/base feature. To open this PropertyManager: Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path. Click Swept Boss/Base (Features toolbar).

What is loft in Solidworks?

The loft feature is an important tool for (surface) modeling in SolidWorks. The loft feature creates a shape by making transitions between multiple profiles and guide curves. This tool is very valuable for modeling complex surfaces. You can do some really cool stuff when you use this feature properly.

What is Sweep feature?

Sweep features are defined by using custom 2D cross-section (or face) moved along a pre-set path to create a 3D shape or surface. With the sweep method, the user defines a 2-D or 3-D guide curve, in addition to creating the cross-section.

Can you sweep a body in SOLIDWORKS?

For cut sweeps only, you create a solid sweep by moving a tool body along a path. The path must be tangent within itself (no sharp corners) and begin at a point on or within the tool body profile.



Sweeps.

Use guide curves
Be created as thin features
Sweep with solid feature Sweep with thin feature

What is swept cut?

Solidworks swept cut is features tool, mainly used to cut a solid model or part by sweeping a completely closed profile along an open or closed path. To use swept cut, you should need a closed profile and open or closed path, which may be line, helix, and circle, rectangular or arc etc.

IT IS INTERESTING:  How do I mirror a part in Solidworks assembly?

Where is sweep in SOLIDWORKS?

Use a sketch, existing model edges, or curves. Click one of the following: Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep. Swept Cut on the Features toolbar or Insert > Cut > Sweep.

Special Project