How do you extend a wall to a roof in Revit?

How do you attach a wall to a roof in Revit?

You can attach walls to in-place roofs or floors.



  1. In the drawing area, select one or more walls you want to attach to other elements.
  2. Click Modify | Walls tab Modify Wall panel Attach Top/Base.
  3. On the Options Bar, for Attach Wall, select either Top or Base.
  4. Select the elements to which the wall will attach.

How do you join a wall and roof?

Click Modify tab Geometry panel (Join/Unjoin Roof). Select an edge of the roof that you want to join, and then select the wall or roof to which you want to join the roof.

How do you extend a roof in Revit?

Extend the Roof Face

  1. In the drawing area, select the roof face. When you select the roof face, roof shape handles display. Shape handles are available for all non-horizontal side surfaces. …
  2. Drag the shape handles to extend the roof face.

When modeling ceilings in Revit What are the two methods used?

Use the Ceiling tool to create a ceiling in a reflected ceiling plan view.

  • Open a ceiling plan view.
  • Click Architecture tab Build panel (Ceiling).
  • In the Type Selector, select a ceiling type.
  • Place a ceiling using one of the following methods: Use walls as ceiling boundaries.
IT IS INTERESTING:  Your question: Where is the status bar located in AutoCAD?

How do you delete a wall in Revit?

Click Modify | Walls tab Modify Wall panel Detach Top/Base. Select the individual elements from which to detach the walls. Alternatively, if you want to detach the selected walls from all other elements at once (or you are not sure which elements are attached), click Detach All on the Options Bar.

How do you join two roofs together?

How to Join the Roof Pitches?

  1. Step 1 – Preparing the Area. …
  2. Step 2 – Measuring the Length of the Joined Area. …
  3. Step 3 – Prepare a Piece of Flashing Material. …
  4. Step 4 – Place the Flashing on the Meeting Point. …
  5. Step 5 – Sealing the Edges of The Roof with Lumber. …
  6. Step 6 – Apply a Bead of the Sealant Material.

How do you change the slope of a roof in Revit?

Select the roof, and click Modify | Roofs tab Mode panel (Edit Footprint) or (Edit Profile). Make necessary changes. If you want to change the position of the roof, use the Properties palette to edit the Base Level and Offset properties to change the position of the reference plane.

How do I change a ceiling pattern in Revit?

To modify a ceiling, select it and use tools on the Modify | Ceilings tab. select the ceiling. Then select a different ceiling type from the Type Selector. see Modifying Sketched Elements.

Special Project