How do I use the shell command in SolidWorks?

Click Shell (Features toolbar) or Insert > Features > Shell. In the PropertyManager, under Parameters: Some fields that accept numeric input allow you to create an equation by entering = ( equal sign) and selecting global variables, functions, and file properties from a drop-down list.

What does the shell command do in SolidWorks?

The shell tool hollows out a part, leaves open the faces you select, and creates thin-walled features on the remaining faces. If you do not select any face on the model, you can shell a solid part, creating a closed, hollow model. You can also shell a model using multiple thicknesses.

What does the Shell feature do?

The Shell feature hollows out the inside of the solid, leaving a shell of a specified wall thickness. It lets you specify a surface or surfaces that you want to remove from the shell. … When defining a shell, you can also select surfaces where you want to assign a different thickness.

Why can’t I shell solidworks?

Re: Can’t shell an object in solidworks



Forgot to add, shelling will only work if all the surfaces can be offset by the value you set. After a second look at your picture, I’m pretty sure the side ribs and the threaded bottleneck will prevent shelling from working.

IT IS IMPORTANT:  Is Ryzen 4700u good for AutoCAD?

Where is the shell command in Solidworks?

Click Shell (Features toolbar) or Insert > Features > Shell. In the PropertyManager, under Parameters: Some fields that accept numeric input allow you to create an equation by entering = ( equal sign) and selecting global variables, functions, and file properties from a drop-down list.

How do you mirror a shell in Solidworks?

In assemblies, you can mirror assembly features. To open this PropertyManager: In a part, click Mirror (Features toolbar) or Insert > Pattern/Mirror > Mirror. In an assembly, click Assembly Features (Assembly tab on the CommandManager) and click Mirror , or click Insert > Assembly Feature > Mirror.

How do you shell extrusion in Solidworks?

Add an extrude feature to the bottom face of the model to increase the thickness around the area that failed. To create the shell, remove the faces of the extrude feature and the original bottom face of the model. Search ‘Shell – Add an Extrude Feature’ in the SOLIDWORKS Knowledge Base.

How do you intersect in Solidworks?

A similar command to the combine is the intersect, this will create 4 discs where the cylinders intersect with the curved shape. This is located in Insert>Features>Intersect, then select all the bodies to intersect and click which sections are to be removed.

How do you make a linear pattern in Solidworks?

To create a linear sketch pattern:

  1. In an open sketch, click Linear Sketch Pattern. (Sketch toolbar) or Tools > Sketch Tools > Linear Pattern.
  2. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .
  3. Set values for Direction 1 (X-axis). …
  4. Repeat for Direction 2 (Y-axis). …
  5. Click .
IT IS IMPORTANT:  Question: Where can I upgrade my Rhino Tank GTA 5 Online?
Designer blog