How do you cut an assembly in Solidworks?

To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.

How do you cut a rectangle in SolidWorks?

You can also go to the toolbar and click Insert -> Cut -> Extrude to pull up the Cut-Extrude Feature menu as well. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create the 3D model feature.

Can you Extrude in a SolidWorks assembly?

SolidWorks lets you sketch on any reference plane in Assembly environment. You can extrude the sketch with the help of Extrude from Feature Tab. You can also follow the same method with existing part in assembly also.

How do you change extrude cuts in SolidWorks?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

IT IS IMPORTANT:  Frequent question: How do you add equal relations in SolidWorks?

What is the function of extruded cut?

About an Extruded Cut. You can use the Extrude tool to remove material by projecting a sketched section normal to the sketching plane. You can use open or closed sections to create a cut. Removing material using a closed section creates a slot.

How do you cut a shape out of another shape in SolidWorks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

How do you cut a 3D model in SolidWorks?

To trim a 3D sketch:

  1. Start the 3D sketch on a 2D plane.
  2. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.

How do I create a new part in a SolidWorks assembly?

To create a part within an assembly:

  1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
  2. For externally saved parts, type a name for the new part in the Save As dialog box and click Save.
  3. Select a plane or planar face (while the pointer is ).

How do you intersect in assembly in SolidWorks?

After capping all openings, use the intersect command found under ‘Insert’ > ‘Features’ > ‘Intersect‘. Select all your surfaces used to cap the openings, as well as the part itself, and click ‘intersect‘ for it to calculate the resulting solids.

IT IS IMPORTANT:  How do I reduce the size of a Revit model?

How do you cut an assembly?

6 Tips for Putting Together the Assembly Cut

  1. Watch all the footage. Putting together a workable assembly cut requires you to make a series of basic decisions about what footage to use. …
  2. Start chronologically. …
  3. Resist the urge to over-edit. …
  4. Try a blind assembly. …
  5. Attempt multiple versions. …
  6. Don’t panic.

How do I edit a SolidWorks file?

Editing an Existing Sketch

  1. Click Sketch on the Sketch toolbar, or click Insert > Sketch. Select an existing sketch to edit.
  2. Right-click a sketch in the FeatureManager design tree, or right-click a sketch entity in the graphics area, and select Edit Sketch.

Can we extrude the sketch in both direction yes or no?

To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.

Designer blog