How do you move a boss Extrude in Solidworks?

How do you edit extrude in SolidWorks?

To edit the definition of a feature:

  1. Do one of the following: Select a feature in the FeatureManager design tree or the graphics area. Click Edit > Definition. …
  2. Edit the definition in the dialog box by specifying new values or options.
  3. Click OK to accept the changes.

How do you sketch a boss-extrude?

To start a sketch with an Extruded or Revolved Boss/Base:

  1. Click Extruded Boss/Base or Revolved Boss/Base. …
  2. Select one of the three planes (Front Plane, Top Plane, and Right Plane) displayed. …
  3. Create a sketch with the sketch entity tool, or select a tool on the Sketch toolbar and create a sketch.

How do you rotate a SolidWorks screen on a laptop?

Click Rotate View (View toolbar) or View > Modify > Rotate then drag the pointer . Drag with the middle mouse button. Press the arrow keys. Hold down Shift to rotate in 90° increments.

How do you rotate a sketch in SolidWorks 2020?

(Sketch toolbar) or Tools > Sketch Tools > Rotate. In the PropertyManager, under Entities to Rotate: Select sketch entities for Sketch item or annotations.



If no entities were selected, these items appear:

  1. Rotation Reference. …
  2. Rotation Origin: Specify the rotation origin point relative to the X, Y, and Z origin.
IT IS IMPORTANT:  Your question: How do I edit an ordinate dimension in Solidworks?

Where is the extrude button in Solidworks?

Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion.

Can we extrude the sketch in both direction in Ansys?

Yes, using extruded direction selection in the box under the end condition drop down.

Can you extrude an open sketch in Solidworks?

To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. … To extrude as a thin feature, set the PropertyManager options in Thin Feature.

How do you edit a sketch after extrude?

Editing an Existing Sketch

  1. Click Sketch on the Sketch toolbar, or click Insert > Sketch. Select an existing sketch to edit.
  2. Right-click a sketch in the FeatureManager design tree, or right-click a sketch entity in the graphics area, and select Edit Sketch.

How do you remove extrude in Solidworks?

Select the end condition. Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces.

How do I edit a part in Solidworks?

Editing a Part in an Assembly

  1. Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. …
  2. Make the necessary changes to the part.

What is extrude boss?

Oysu. Chapter 3 Extruded Boss and Cut. Extrude tool is used to extend a sketched profile in one or two directions as either a thin feature or a solid feature. An extrude operation can either add material to a part (in a base or boss) or remove material from a part. 3.1 Extruded Boss.

IT IS IMPORTANT:  What specs do you need for Revit?
Designer blog