How do you use Cut command in Revit?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

How do you cut a solid in Revit?

Solid forms will only cut the following solids: Form elements.



Family instances inside of the massing editor.

  1. Create two adjacent solid forms. …
  2. Click Modify tab Geometry panel (Cut).
  3. Select the solid form to be cut.
  4. Select the cutting solid form.

How do you cut a void in Revit?

Cutting with voids in families when loaded

  1. Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters.
  2. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK.
  3. Load the family into the project and place it.

How do you cut a wall in Revit?

Cut a Rectangular Opening in a Wall

  1. Open an elevation or section view where you can access the wall that will host the opening.
  2. Click (Wall Opening). Where is it? …
  3. Select the wall that will host the opening.
  4. Sketch a rectangular opening. …
  5. To modify an opening, click Modify, and select the opening.
IT IS IMPORTANT:  How do you section view a part in Solidworks?

Can you trim on Revit?

click Modify tab Modify panel Trim drop-down (Trim/Extend to Corner). Select each of the elements. When selecting an element that needs to be trimmed to form the corner, make sure you click the part of the element to be retained. click Modify tab Modify panel Trim drop-down (Trim/Extend Single Element).

Where is the cut geometry tool in Revit?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

How do you cut a sink hole in a countertop in Revit?

After adding a void to the sink family, you need to open Family Category and Parameter window and check the [Cut with Void when loaded] box. Upon placing the sink to top of the countertop, use Cut command on the Modify menu to cut the hole. You can also nest the sink to the countertop family as well.

What does cut with voids when loaded mean?

The process of cutting a solid architectural element by a family that contains Void, by using ‘cut with a void when loaded’ Well, the main purpose of using ‘cut with the void when loaded’ parameter is to cut solid architectural elements when loaded in a project.

How do you cut extrusions in Revit?

Solution:

  1. Edit the in place wall.
  2. Create a new void extrusion that will define the opening.
  3. Use the “Cut” tool and select the void geometry.
  4. Finish the solid edition.

How do you cut a wall in half in Revit?

Help

  1. Click Modify tab Modify panel (Split Element).
  2. Place the cursor on the wall or line at the point you wish to split. Note: A stacked wall can only be split vertically. …
  3. Click to place the split. A permanent horizontal line displays on the wall indicating the split.
IT IS IMPORTANT:  How do I install SHX files in AutoCAD?

How do you create a floor opening cut in Revit?

Cut an Opening in a Floor, Roof, or Ceiling

  1. Click By Face or Vertical. Where is it? Architecture tab Opening panel. Structure tab Opening panel. …
  2. If you chose By Face, select a face in the floor, ceiling, or roof. If you chose Vertical, select the entire element. Selected face for opening by face. …
  3. Click Finish Opening.
Designer blog