You asked: What is construction geometry Solidworks?

What is the difference between construction geometry and regular geometry?

8)What is the difference of construction geometry and normal geometry? Construction geometry may be created using the same entities (e.g., lines, arcs, and circles) as normal geometry. However, unlike normal geometry, construction entities cannot be used as profiles for the creation of solid features.

Where is construction line in Solidworks?

In the PropertyManager, you can convert solid line segments to construction lines by selecting For Construction in the PropertyManager. To add centerlines in a rectangle, select Add construction lines and select either From Corners or From Midpoints in the PropertyManager.

What is the construction curve feature available in Solidworks?

You can project a sketched curve onto a model face to create a 3D curve. You can also create a 3D curve that represents the intersection of two extruded surfaces generated by creating sketches on two intersecting planes. You can create a helix or spiral curve in a part.

How do you hide construction geometry in Solidworks?

To hide all construction geometry, use the “Shift” and “P” keys simultaneously.

IT IS IMPORTANT:  Frequent question: How do I open a shared file in Revit?

How do you draw a construction line in SolidWorks?

Converting Sketch Entities in a Drawing to Construction Geometry

  1. Click Construction Geometry on the Sketch toolbar.
  2. Click Tools > Sketch Tools > Construction Geometry.
  3. Select the For construction check box in the PropertyManager.
  4. Right-click any selected sketch entity and select Construction Geometry.

How do you do construction geometry in Solidworks?

In an open sketch, select one or more sketch entities and do one of the following:

  1. Select For construction in the PropertyManager.
  2. Click Construction Geometry on the Sketch toolbar.
  3. Click Tools > Sketch Tools > Construction Geometry.
  4. Right-click a sketch entity and select Construction Geometry (drawings only).

What is the purpose of construction curve features?

Applicable to all types of project management, the purpose of a construction s-curve is to make sure that the project is tracking according to what was planned, so that it finishes on time and on budget.

How do you curve a project in Solidworks?

To project a curve: Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.

How do you hide a construction line in Solidworks sketch?

To hide or show edges in a drawing:

  1. Click Hide/Show Edges. …
  2. Select the edges to hide (you can select edges individually, or use box selection), then click . …
  3. To show edges, click Hide/Show Edges. …
  4. Select the hidden edges highlighted in orange, (you can select edges individually, or use box selection), then click .
IT IS IMPORTANT:  You asked: Does AutoCAD require high CPU?

How do you hide construction lines in Creo?

Trying to Hide/Blank Sketch Lines on Drawing (Creo Parametric 3.0…

  1. go into the layer tree.
  2. right click on layer with the sketch.
  3. hide layer.
  4. save status.
  5. check out/check in.
Designer blog